Laboratory Water Purification System Manufacturer and Supplier in Uttarakhand

Lab N system is a flexible compact solution that combines the production of pure water and ultra pure water in a single unit.

Applications Include HPLC, GC,GC-MS,ICP-MS, AA, IC ,Cell & Tissue Culture, PCR, DNA sequencing, Electrophoresis.

LAB NE systems with advanced EDI (Electrodeionization Technology) that not only consumes low energy but also gives you additional benefits of lower maintenance, cost, better ion exchange and no particulates or organic contamination.

Lab Mini for the labs that require Ultra Pure Water in small volumes for most sensitive and critical lab analytical applications like HPLC, ICP, GC-MS etc.

Tap to Ultra Pure Water System with EDI Technology – Dispenses Type II and Type I Water for Analytical and Life science applications.

Ultrapure water (UPW) is water that is purified to uncommonly stringent specifications. the water is treated to the highest levels of purity for all contaminant types, including: organic and inorganic compounds; dissolved and particulate matter; volatile and non-volatile, reactive and inert; hydrophilic and hydrophobic; and dissolved gases.

Ultrapure water does not contain any contaminants or impurities, both of which are present in average drinking water. The types of contaminants that are present in the water, and the amount, can depend on where the water is sourced from. The presence of impurities and contaminants will have a serious impact on your experiments. By ensuring you use water meets a high level of purity you eliminate any sabotage to your data and ensure reliable, accurate results.

There are multiple processes in making of ultrapure water, The process begins with pretreatment activated carbon water filter then through a reverse osmosis water filter (RO), ion exchange (IX) or electrodionization (EDI) for reagent grade water, UV purification, again going through ion exchange (IX) and then finally through 0.2 micron point of use filter to get ultra pure water.

Type III Water - Type III water can be used for any non critical works in the laboratory like Glassware Washing, Filling Autoclaves or feed to Ultra Pure Water Systems

Type II Water - Type II water is used in general laboratory applications such as buffers, microbiological culture media preparation, for preparation of reagents for chemical analysis etc; Can be used as feed to Type 1 water systems

Type I Water - Type I water is required for critical laboratory applications such as HPLC mobile phase preparation, blanks and sample dilution in GC, HPLC, AA, ICP-MS and other advanced analytical techniques; preparation of buffers and culture media for mammalian cell culture and IVF; production of reagents for molecular biology applications (DNA sequencing, PCR).

No, As mentioned above, each quality of water does a specific work only, Ex: you may use Type 1 water for Type III water applications but not vice versa

Following basic parameters must be discussed with the technical sales specialist to arrive at correct system

Feed Water

Application

How much water is required per day

In any water Purification system Pretreatment Cartridge, Reverse Osmosis Cartridge, Deionisation Cartridge / EDI Cartrdige, Dual Wave length UV Lamp, Ultra Pure Cartridge, Ultra Filtration Cartridge, POU filter are the consumables present and each consumable is recommended to be replaced at specific intervals.

Yes, Tap water if the water source is from the municipal supply can be used as feed water, If it is Ground water or any other source of water then additional pre filtration system must be installed before the system

The preventive maintenance schedule will be explained by our Service executive at the time of installation

We have tried to design our system so that it meets all the international specifications of Laboratory water, tried to minimise the multiple units / consumables that may be required to get the final quality of water with out compromising on the customer’s requirements

These are Laboratory grade water purification systems specifically designed to be used only for Laboratory applications.