The Sulfimax GX Go determines hydrogen sulphide and volatile sulphides in liquids and gases. The released H S gas is conducted to the 2 highly sensitive sensor, which detects H S 2 in the range of 0.01 to 10,000 ppm. If the Sulfimax GX Go is extended with the optionally available H S Headspace 2 Module, solid and pasty samples can also be measured. The sample can be dispensed directly by syringe without pretreatment. A typical measurement takes 5 min, depending on the sample composition. By effective gas extraction the H S is 2 completely expelled from the sample. Interferences due to the sample matrix practically do not occur
FEATURES
- Complete separation of H S from the sample 2 by effective gas extraction
- Simple calibration
- Software: simple, clear, intuitive
- Dosing manually by syringe
- Definition of own methods for device contro
- · Typical measuring time 5 min (depending on sample properties)
Applications
- Water, drinking water, surface water
- Municipal wastewater
- Industrial wastewater
- Monitoring of landfill-leachate
- Gas analysis (e. g. LNG, LPG)
- H2S in hydrocarbon mixtures
- Investigation of technical and pharmaceutical products
- Quality management
Advantages
- · Complete measuring system for the determination of Bromine Index or Bromine Number
- Fully-automatic volumetric titration
- Precise adjustment of the titration parameters by control algorithms
- Preset measurement method allows an immediate start
- The result output can be adjusted to your needs by using a formula generator
Technical Specifications
| Measuring range: | 0.01 ... 10,000 ppm (dependent on sample volume) |
| Resolution: | 0.1 µg abs., output signal linear |
| Measuring duration: | 2 ... 10 min (dependent on the sample), usually 5 min |
| Sample volume: | 0.01 ... 20 mL |
| Gas flow: | Up to 50 L/h |
| Power supply: | 230 V/50 Hz, 115 V/60 Hz |
| Power input: | 150 W |
| Dimensions:: | 260 x 310 x 300 mm (W x D x H) |
| Weight: | 8 kg |