Test Method :
A steel test cup rotating at 800 RPM is pressed against a steel test block. Sample under test is carried by the test cup into the sliding contact. Test load at the contact is progressively increased, score value and OK value are determined.
Features :
- Compliant to ASTM D2509 and D2782
- Fluid recirculation system
- Automatic grease feeder
- Friction lever and weights
- 1:10 loading lever with load cell and digital indicator
- Oil reservoir with heating system
Included Accessories :
- Basic Test Rig
- 2 HP Motor with Frequency Drive
- Precision Spindle Mounted Rugged Frame
- Loading Lever with Spring Loaded Pan
- Friction Lever with Sliding Weight & Pan
- Load Cell to Measure Normal Load
- Dead Weights Counter Weights
- Lubricating Recirculating System
- Auto Grease Feeder Test Cups (qty. 25) Test Specimens (qty. 25)
- Power Cables
- Calibration Reports Tool Kit
Specifications :
- Conforms to the specifications of: ASTM D2509, D2782
- Test Rig Outer Diameter: 49.22 mm
- Test Block: 12.32 x 12.32 x 19.1 mm
- Rotational Speed: 100 to 800 RPM
- Rate of Loading: 0.9 to 1.3 kg/sec
- Dead Weights: 52 kg
- Auto Fluid Recirculation Feeder: 3L capacity
- Auto Grease Feeder: 45 ? 10 g/min
- Preset Timer: 99hrs:59min:59sec
- Preset Temperature Controller: up to 100?C
- Loading Arm: 1:10 Ratio
Electrical Requirements :
- 115V 60Hz, Single Phase, 10.2A
- 220-240V 50/60Hz, Single Phase, 5.3A
Shipping Information :
- Shipping Weight: 1372 lbs (622.3 kg)
- Dimensions: 50x50x69 in. (127x127x175.3 cm)
Additional Accessories :
- K92090-5 Digital Camera with Microscope and Manually Controlled Stage and Image Capturing Data Acquisition System
- K92090-6 Acoustic Sensor
- K92090-7 Vibration Sensor
Video Resources :
Below are links to tutorial videos for this productRequest Quote